Improving flexible pavement performance through suitable aggregate gradation

Authors

  • Mohammad Razeq Shakhan Department of Civil Engineering, Dokuz Eylul University, TR (Türkiye)
  • Ali Topal Department of Civil Engineering, Dokuz Eylul University, TR (Türkiye)
  • Burak Sengoz Department of Civil Engineering, Dokuz Eylul University, TR (Türkiye)

DOI:

https://doi.org/10.7764/RDLC.21.2.295

Keywords:

flexible pavement, aggregate gradation, rutting, cracking

Abstract

The objective of this study was to improve the performance of flexible pavement through suitable aggregate gradation. Thus, initially, the dynamic modulus of asphalt mixtures |E*| for different aggregate gradations were predicted, and suitable aggregate gradation was determined. Then the performance of three different pavement structures for two aggregate gradations (Mid and Suitable), using AASHTOWare Pavement ME Design 2.5. 5, were evaluated for local conditions of Izmir, Turkey. The analysis result revealed that using suitable values compared to middle values increased the |E*| and improved the rutting and fatigue resistance of all pavement structures for any traffic levels. The output of this study can be used as a guide for hot mixed asphalt mix design and pavement design based on Mechanistic-Empirical Pavement Design Guide as well.

Downloads

Download data is not yet available.

Author Biography

Ali Topal, Department of Civil Engineering, Dokuz Eylul University, TR (Türkiye)

AASHTO. (2008). Mechanistic Empirical Pavement Design Guide: A Manual of Practice (Interim Ed). American Association of State Highway and Transportation Officials.

AASHTO. (2015). Mechanistic-Empirical Pavement Design: A Manual of Practice (2nd ed.). American Association of State Highway and Transportation Officials.

AASHTO. (2020). Mechanistic-Empirical Pavement Design Guide: A Manual of Practice (3rd ed.). American Association of State Highway and Transportation Officials.

Ahmed, M. A., & Attia, M. I. E. (2013). Impact of Aggregate Gradation and Type on Hot Mix Asphalt Rutting In Egypt. International Journal of Engineering Research and Applications (IJERA), 3(4), 2249–2258.

ARA, Inc., E. C. D. (2004). Guide For Mechanistic-Empirical Design of New Rehabilitated Pavement Structures, Part 2. Design Inputs. National Cooperative Highway Research Program.

Chen, J.-S., & Liao, M.-C. (2002). Evaluation of internal resistance in hot-mix asphalt (HMA) concrete. In Construction and Building Materials (Vol. 16).

Cross, S. A., Gibbe, R., & Aryal, N. (2011). Development of Flexible Pavement Database for Local Calibration of MEPDG: Part 2 Evaluation of ODOT SMA Mixtures. In Oklahoma Department of Transportation: Vol. FHWA-OK-11 (Issue Final Report). Oklahoma Department of Transportation.

El-Basyouny, M. M., & Mamlouk, M. S. (1999). Effect of aggregate gradation on rutting potential of Superpave mixes. In the 8th Annual Meeting of the Transportation Research Board.

Fang, M., Park, D., Singuranayo, J. L., Chen, H., & Li, Y. (2019). Aggregate gradation theory, design and its impact on asphalt pavement performance: a review. International Journal of Pavement Engineering, 20(12), 1408–1424.

Garcia, V. M., Barros, L., Garibay, J., Abdallah, I., & Nazarian, S. (2020). Effect of Aggregate Gradation on Performance of Asphalt Concrete Mixtures. Journal of Materials in Civil Engineering, 32(5), 04020102.

General Directorate of Highways. (2008). Turkish Flexible Pavement Design Guide. General Directorate of Highways.

General Directorate of Highways. (2011). Features and Trends of Heavy Vehicle Traffic in Freight Transport on Highways, 2007-2009. General Directorate of Highways.

General Directorate of Highways. (2013). Highway Technical Specifications (2013th ed., Vol. 1). General Directorate of Highways.

General Directorate of Highways. (2014). Features and Trends of Heavy Vehicle Traffic in Freight Transport on Highways, 2010-2014. General Directorate of Highways.

General Directorate of Highways. (2016). Highway Traffic Flow Characteristics and Parameters. General Directorate of Highways.

General Directorate of Highways. (2017). Traffic and Transportation Information and Characteristics. General Directorate of Highways.

Huang, Y. H. (2004). Pavement Analysis and Design (Second Edi). Pearson/Prentice Hall.

Jenifer, J. V., & Brindha, D. (2021). Development of hybrid steel-basalt fiber reinforced concrete-in aspects of flexure, fracture, and microstructure. Revista de la construcción, 20(1), 62-90.

M., A. A. H. (2014). Effect of Aggregate Gradation and Type on Hot Asphalt Concrete Mix Properties. JES. Journal of Engineering Sciences, 42(3), 567–574.

Serin, M. A. Oguzhanoglu, and C. Kayadelen, “Comparative analysis of stress distributions and displacements in rigid and flexible pavements via finite element method,” Rev. la Constr., vol. 20, no. 2, pp. 321–331, 2021, doi: 10.7764/RDLC.20.2.321.

STAKSTON, A. D., & BAHIA, H. U. (2003). The effect of fine aggregate angularity, asphalt content and performance graded asphalts on hot mix asphalt performance. In WisDOT Highway Research Study, Wisconsin Department of Transportation.

References

AASHTO. 2008. Mechanistic Empirical Pavement Design Guide: A Manual of Practice. Interim Ed. USA: American Association of State Highway and Transportation Officials.

AASHTO. 2015. Mechanistic-Empirical Pavement Design: A Manual of Practice. 2nd ed. USA: American Association of State Highway and Transportation Officials.

AASHTO. 2020. Mechanistic-Empirical Pavement Design Guide: A Manual of Practice. 3rd ed. USA: American Association of State Highway and Transportation Officials.

Ahmed, Manal A., and Mohamed I. E. Attia. 2013. “Impact of Aggregate Gradation and Type on Hot Mix Asphalt Rutting In Egypt.” International Journal of Engineering Research and Applications (IJERA) 3(4):2249–58.

ARA, Inc., ERES Consultants Division. 2004. Guide For Mechanistic-Empirical Design of New Rehabilitated Pavement Structures, Part 2. Design Inputs. Illinois: National Cooperative Highway Research Program.

Chen, Jian-Shiuh, and Min-Chih Liao. 2002. Evaluation of Internal Resistance in Hot-Mix Asphalt (HMA) Concrete. Vol. 16.

Cross, Stephen A., Robel Gibbe, and Nyrajan Aryal. 2011. Development of Flexible Pavement Database for Local Calibration of MEPDG: Part 2 Evaluation of ODOT SMA Mixtures. Vol. FHWA-OK-11. Oklahoma: Oklahoma Department of Transportation.

El-Basyouny, M. M., and M. S. Mamlouk. 1999. “Effect of Aggregate Gradation on Rutting Potential of Superpave Mixes.” in In the 8th Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.

Fang, Mingjing, Daewook Park, Jean Louis Singuranayo, Hao Chen, and Yueguang Li. 2019. “Aggregate Gradation Theory, Design and Its Impact on Asphalt Pavement Performance: A Review.” International Journal of Pavement Engineering 20(12):1408–24. doi: 10.1080/10298436.2018.1430365.

Garcia, Victor M., Luiza Barros, Jose Garibay, Imad Abdallah, and Soheil Nazarian. 2020. “Effect of Aggregate Gradation on Performance of Asphalt Concrete Mixtures.” Journal of Materials in Civil Engineering 32(5):04020102. doi: 10.1061/(asce)mt.1943-5533.0003147.

General Directorate of Highways. 2008. Turkish Flexible Pavement Design Guide. Ankara: General Directorate of Highways.

General Directorate of Highways. 2011. Features and Trends of Heavy Vehicle Traffic in Freight Transport on Highways, 2007-2009. Ankara, Turkey: General Directorate of Highways.

General Directorate of Highways. 2013. Highway Technical Specifications. Vol. 1. 2013th ed. Ankara, Turkey: General Directorate of Highways.

General Directorate of Highways. 2014. Features and Trends of Heavy Vehicle Traffic in Freight Transport on Highways, 2010-2014. Ankara: General Directorate of Highways.

General Directorate of Highways. 2016. “Highway Traffic Flow Characteristics and Parameters.”

General Directorate of Highways. 2017. Traffic and Transportation Information and Characteristics. Ankara, Turkey: General Directorate of Highways.

Huang, Yang Hsien. 2004. Pavement Analysis and Design. Second Edi. USA: Pearson/Prentice Hall.

M., Afaf A. H. 2014. “Effect of Aggregate Gradation and Type on Hot Asphalt Concrete Mix Properties.” JES. Journal of Engineering Sciences 42(3):567–74. doi: 10.21608/jesaun.2014.115005.

STAKSTON, A. D., and H. U. BAHIA. 2003. The Effect of Fine Aggregate Angularity, Asphalt Content and Performance Graded Asphalts on Hot Mix Asphalt Performance. Wisconsin.

Downloads

Published

2022-08-31 — Updated on 2022-08-31

Versions

How to Cite

Shakhan, M. R. ., Topal, A. ., & Sengoz, B. (2022). Improving flexible pavement performance through suitable aggregate gradation. Revista De La Construcción. Journal of Construction, 21(2), 295–308. https://doi.org/10.7764/RDLC.21.2.295