Statistical investigation of the effects of different origin aggre-gate properties on the mechanical properties of concrete

Authors

  • Ahmet Teymen Department of Mining Engineering, Niğde Ömer Halisdemir University, TR (Türkiye)

DOI:

https://doi.org/10.7764/RDLC.22.2.482

Keywords:

concrete properties, aggregate type, impact energy, abrasion resistance, nonlinear multiple regression.

Abstract

Aggregates are one of the most important components of the concrete mix and the aggregate properties have a great influence on the properties of the hardened concrete. From this point of view, the contribution of the nature of the aggregate to the general mechanical behavior of concrete should be better understood and investigated. The main purpose of this study is to present practical and useful equations for the rapid evaluation of the basic properties of concrete, especially during the preliminary design phase. A series of laboratory studies were conducted to determine the effects of twenty aggregates with very different origins and properties on various properties of concretes. Laboratory tests with the same or similar principles as aggregate rocks have been repeated for concrete samples produced using these aggregates. Nine SRA equations were generated to directly predict similar concrete properties with the help of aggregate properties. Equations with very high coefficients of determination were produced between various aggregate properties and concrete properties except for the SHH property. In addition, nonlinear multiple regression analysis (NMRA) was used for twenty-four equations to predict some basic properties of concrete (strength, abrasion, tensile, and impact). The performances of the derived equations were evaluated with a statistical tool developed by the author. Accordingly, the models with the strongest prediction capacity were obtained for STSC, LAC, CSC, and, IEC respectively. Results from NMRA showed that equations with the highest coefficient of determination were obtained with Model-3 for CSC (Equation 15), and STSC (Equation 18), and Model-1 for LAC (Equation 22), and IEC (Equation 31). Concrete has a complex structure that is affected by many parameters. In accordance with this complex nature, the approach to predict the main concrete properties with nonlinear multiple methods by including similar aggregate properties as well as non-destructive methods representing concrete/aggregate (hardness, ultrasonic pulse velocity and physical properties) has been successful. The extremely high coefficients of determination, ranging from 0.81 to 0.96, obtained with NMRA, indicate that basic concrete properties can be strongly predicted by aggregate properties and some concrete properties that can be tested non-destructively.

Downloads

Download data is not yet available.

References

Abdullahi, M. (2012). Effect of aggregate type on compressive strength of concrete. International Journal for Computational Civil and Structural Engi-neering, 2(3), 782. https://doi.org/10.6088/ijcser.00202030008

ACI Committee 221 (2001). Guide for use of normal weight aggregate in concrete, ACI manual of concrete practice: Part 1. Farmington Hills (MI).

ACI Committee 544.2R-89 (Reapproved 2009). Measurement of Properties of Fiber Reinforced Concrete, Reported by ACI Committee 544, Farmington Hills, Michigan: American Concrete Institute.

Ahmad, S., & Alghamdi, A. (2012). A study on effect of coarse aggregate type on concrete performance. Arabian Journal for Science and Engineering, 37(7), 1777-1786. https://doi.org/10.1007/s13369-012-0282-6

Aitcin, P.C., & Mehda, P.K. (1990). Effect of coarse aggregate characteristics on mechanical properties of high strength concrete. ACI Materials Journal, 87(2), 103-107.

Aitcin, P.C., Sarkar, S.L., & Laplante, P. (1990). Long-term characteristics of a very high strength concrete. Concrete International, 12(1): 40–44.

Al-Oraimi, S.K., Taha, R., & Hassan, H.F. (2006). The effect of the mineralogy of coarse aggregate on the mechanical properties of high-strength concrete. Construction and Building Materials, 20, 499–503. http://doi.org/ 10.1016/j.conbuildmat.2004.12.005

Alexander, M.G. (1993). Two experimental techniques for studying the effects of the interfacial zone between cement paste and rock. Cement and Con-crete Research, 23(3), 567–575. http://doi.org/10.1016/0008-8846(93)90006-U

Alqarni, A. S., Albidah, A. S., Alaskar, A. M., & Abadel, A. A. (2020). The effect of coarse aggregate characteristics on the shear behavior of reinforced concrete slender beams. Construction and Building Materials, 264, 120189. https://doi.org/10.1016/j.conbuildmat.2020.120189

Aminur, M.R., Harunur, M.R., Teo, D.C.L., & Abu Zakir, M.M. (2010). Effect of aggregates and curing conditions on the compressive strength of concrete with age. Journal of Civil Engineering Science and Technology, 1(2), 1-6. https://doi.org/10.33736/jcest.71.2010

ASTM C-131-01 (2006). Resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles Machine. ASTM Designa-tion. Philadelphia: American Society for Testing Materials.

Balaji, M., Sharma, S.D., Vigneshwaran, A., & Fayaz Ahamed, K. (2017). Experimental study on the behavior of self-compacting self-cured concrete using chemical admixtures and metakaolin; International Conference on Emerging trends in Engineering, Science and sustainable technology, (ICETSST 2017) 18-25.

Bentz, D. P., Arnold, J., Boisclair, M. J., Jones, S. Z., Rothfeld, P., Stutzman, P. E., ... & Ardani, A. (2017). Influence of aggregate characteristics on concrete performance (No. NIST Technical Note 1963). US Department of Commerce, National Institute of Standards and Technology. https://doi.org/10.6028/NIST.TN.1963

Beushausen, H., & Dittmer, T. (2015). The influence of aggregate type on the strength and elastic modulus of high strength concrete. Construction and Building Materials, 74, 132-139. http://dx.doi.org/10.1016/j.conbuildmat.2014.08.055

Beshr, H., Almusallam, A.A., & Maslehuddin, M. (2003). Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Con-struction and Building Materials, 17, 97-103. https://doi.org/10.1016/S0950-0618(02)00097-1

Chi, J.M., Huang, R., Yang, C.C., & Chang, J.J. (2003). Effect of aggregate properties on the strength and stiffness of lightweight concrete. Cement and Concrete Composites, 25(2), 197-205, https://doi.org/10.1016/S0958-9465(02)00020-3

Choi, S. (1978). Introductory Statistics in Science. New Jersey: Prentice-Hall Inc.

Ćosić, K., Korat, L., Ducman, V., & Netinger, I. (2015). Influence of aggregate type and size on properties of pervious concrete. Construction and Building Materials, 78, 69-76. https://doi.org/10.1016/j.conbuildmat.2014.12.073

de Larrard, F., & Belloc, A. (1997). The Influence of aggregate on the compressive strength of normal and high-strength concrete. ACI Materials Journal, 94(5), 417-426.

Dong, J., Li, Z.Q., Yan, X., Liu, Y., Zhao, S.R., Qian, R., Zheng, Y., & Jiang, T. (2022). Effects of coarse aggregates on the mechanical properties, durability and microscopic behaviour of mortar rubble. Construction and Building Materials, 354, 129187. https://doi.org/10.1016/j.conbuildmat.2022.129187

Ezeldin, A.S., & Aitcin, P.C. (1991). Effects of coarse aggregate on the behaviour of normal and high strength concretes. Cement Concrete and Aggregates, 13(2), 121-124. https://doi.org/10.1520/CCA10128J

French, C.W., & Mokhtarzadeh, A. (1993). High strength concrete: effects of materials, curing and test procedures on short-term compressive strength. PCI Journal, 38(3), 76-87.

Góra, J., & Piasta, W. (2020). Impact of mechanical resistance of aggregate on properties of concrete. Case Studies in Construction Materials, 13, e00438. https://doi.org/10.1016/j.cscm.2020.e00438

Góra, J., & Szafraniec, M. (2020). Influence of maximum aggregate grain size on the strength properties and modulus of elasticity of concrete. Applied Sciences, 10(11), 3918. https://doi.org/10.3390/app10113918

Hansen, B. S., Carey, A. S., & Howard, I. L. (2021). Effects of aggregate shape and mineralogy on relationships between concrete mechanical properties. ACI Materials Journal, 118(5), 115-124. http://doi.org/10.14359/51732933

Hussin, A., & Poole, C. (2011). Petrography evidence of the ınterfacial transition zone (ITZ) in the normal strength concrete containing granitic and lime-stone aggregates. Construction and Building Materials, 25, 2298-2303. http://doi.org/10.1016/j.conbuildmat.2010.11.023

Hong, L., Gu, X.L., & Lin, F. (2014). Influence of aggregate surface roughness on mechanical properties of interface and concrete. Construction and Build-ing Materials, 65, 338–349. http://doi.org/10.1016/j.conbuildmat.2014.04.131

https://www.statista.com/statistics/219343/cement-production-worldwide/

ISRM (2007). The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. Suggested methods prepared by the commission on testing methods, international society for rock mechanics. In: Ulusay R, Hudson JA (eds) Compilation arranged by the ISRM Turk-ish national group, Ankara, Turkey, Kozan Ofset.

Kamali-Bernard, S., Keinde, D., & Bernard, F. (2014). Effect of aggregate type on the concrete matrix/aggregates ınterface and ıts ınfluence on the overall mechanical behavior. A numerical study. Key Engineering Materials, 617, 14-17. http://doi.org/10.4028/www.scientific.net/KEM.617.14

Karaman, K., & Bakhytzhan, A. (2020). Prediction of concrete strength from rock properties at the preliminary design stage. Geomechanics and Engineer-ing, 23(2), 115-125, https://doi.org/10.12989/gae.2020.23.2.115

Kılıç, A., Atiş, C.D., Teymen, A., Karahan, O., Özcan, F., Bilim, C., & Özdemir, M. (2008). The influence of aggregate type on the strength and abrasion resistance of high strength concrete. Cement and Concrete Composites, 30, 290-296. https://doi.org/10.1016/j.cemconcomp.2007.05.011

Kılıç, A., & Sertabipoğlu, Z. (2015). Effect of heat treatment on pozzolanic activity of volcanic pumice used as cementitious material. Cement and Con-crete Composites, 57, 128-132. https://doi.org/10.1016/j.cemconcomp.2014.12.006

Kılıç, A., Teymen, A., Özdemir, O., & Atiş, C.D. (2019). Estimation of compressive strength of concrete using physico-mechanical properties of aggregate rock. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 43, 171-178. https://doi.org/10.1007/s40996-018-0156-6.

Liu, Y., & Presuel-Moreno, F. (2014). Effect of elevated temperature curing on compressive strength and electrical resistivity of concrete with fly ash and ground-granulated blast-furnace slag. ACI Materials Journal, 111(5), 531-541.

Mannan, M.A., Basri, H.B., Zain, M.F.M., & Islam, M.N. (2002). Effect of curing conditions on the properties of OPS-concrete. Building and Environment, 37:1167-1171. https://doi.org/10.1016/S0360-1323(01)00078-6

Meddah, M.S., Zitouni, S., & Belâabes, S. (2010). Effect of content and particle size distribution of coarse aggregate on the compressive strength of con-crete. Construction and Building Materials, 24(4), 505-512. https://doi.org/ 10.1016/j.conbuildmat.2009.10.009

Miller, C., Vasconcelos, K., Little, D., & Bhasin, A. (2011). Investigating aspects of aggregate properties that influence asphalt mixtures performance. Research Report for DTFH61-06-C-00021, Texas A&M University at College Station and the University of Texas at Austin, Texas.

Miskovsky. K., Tabora, D.M., Kou, S.Q., & Lindqvist, P.A. (2004). Influence of the mineralogical composition and textural properties on the quality of coarse aggregates. Journal of Materials Engineering and Performance, 13, 144–150. http://doi.org/ 10.1361/10599490418334

Monteiro, P.J.M., & Mehta, P.K. (1986). Interaction between carbonate rock and cement paste. Cement and Concrete Research, 16(2), 127-134. http://doi.org/10.1016/0008-8846(86)90128-6

Mostofinejad, D., Bahmani, H., Eshaghi-Milasi, S., & Nozhati, M. (2023). Empirical relationships for prediction of mechanical properties of high-strength concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 47(1), 315-332. https://doi.org/10.1007/s40996-022-01023-4

Mousavi, S. M., & Ranjbar, M. M. (2021). Experimental study of the effect of silica fume and coarse aggregate type on the fracture characteristics of high-strength concrete. Engineering Fracture Mechanics, 258, 108094. https://doi.org/10.1016/j.engfracmech.2021.108094

Naderi, M., & Kaboudan, A. (2021). Experimental study of the effect of aggregate type on concrete strength and permeability. Journal of Building Engi-neering, 37, 101928. https://doi.org/10.1016/j.jobe.2020.101928

Neville, A.M. (1981). Properties of Concrete. 3rd Ed., Longman Scientific, London, 287.

Neville, A.M. (1995). Properties of concrete. 4th ed. London: Longman Group UK Limited Press.

Özturan, T., & Çeçen, C. (1997). Effect of coarse aggregate type on mechanical properties of concretes with different strengths. Cement and Concrete Research, 27(2), 165-170. https://doi.org/10.1016/S0008-8846(97)00006-9

Patowary, F., & Al Mahmood, R. (2022). Effect of local coarse aggregate type on concrete mechanical properties in Bangladesh. International Journal of Engineering and Advanced Technology, 11(4). http://doi.org/10.35940/ijeat.D3490.0411422

Petrounias, P., Rogkala, A., Kalpogiannaki, M., Tsikouras, B., & Hatzipanagiotou, K. (2016). Comparative study of physico-mechanical properties of ultrabasic rocks and andesites from central Macedonia (Greece). Bulletin of the Geological Society of Greece, 50(4), 1989–1998. http://doi.org/10.12681/bgsg.11945

Petrounias, P., Giannakopoulou, P.P., Rogkala, A., Stamatis, P.M., Tsikouras, B., Papoulis, D., Lampropoulou, P., & Hatzipanagiotou, K. (2018a). The influence of alteration of aggregates on the quality of the concrete: A case study from serpentinites and andesites from central Macedonia (North Greece). Geosciences Journal, 8(4), 115. https://doi.org/10.3390/geosciences8040115

Petrounias, P., Giannakopoulou, P.P., Rogkala, A., Lampropoulou, P., Koutsopoulou, E., Papoulis, D., Tsikouras, B., & Hatzipanagiotou, K. (2018b). The ımpact of secondary phyllosilicate minerals on the engineering properties of various ıgneous aggregates from Greece. Minerals, 8(8), 329. http://doi.org/10.3390/min8080329

Qudoos, A., Rehman, A., Kim, H.G., & Ryou, J.S. (2018). Influence of the surface roughness of crushed natural aggregates on the microhardness of the interfacial transition zone of concrete with mineral admixtures and polymer latex. Construction and Building Materials, (168), 946–957. http://doi.org/10.1016/j.conbuildmat.2018.02.205

Quiroga, P.N., & Fowler, D.W. (2003). The effects of aggregates characteristics on the performance of Portland cement concrete. International Centre for Aggregate Research, ICAR 104-1F.

Rigopoulos, I., Tsikouras, B., Pomonis, P., & Hatzipanagiotou, K. (2010). The influence of alteration on the Engineering properties of dolerites: The exam-ple from the Pindos and Vourinos ophiolites (northern Greece). International Journal of Rock Mechanics and Mining Sciences, 47(1), 69–80. http://doi.org/10.1016/j.ijrmms.2009.04.003

Rocco, C., & Elices, M. (2008). Effect of aggregate shape on the mechanical properties of a simple concrete. Engineering Fracture Mechanics, 76(2), 286-298. http://doi.org/10.1016/j.engfracmech.2008.10.010

SPSS Inc. SPSS regression models (version 17.0). Available from: 〈http://www.spss.com〉

TS EN 706 12620+A1 (2009). Aggregates for concretes. Turkish Standard Institution, Ankara.

TS EN-197-1 (2004). Cements-part 1: Compositions and conformity criteria for common cements. Turkish Standards Institute, TSE, Turkey.

TS EN 12390-3:2009/AC (2012). Testing hardened concrete- part 3: compressive strength of test specimens. Ankara: Turkish Standard Institution.

TS EN 12390-6 (2010). Testing Hardened Concrete – Part 6: Tensile Splitting Strength of Test Specimens, Turkish Standards Institute, TSE, Turkey.

TS EN 12407 (2013). Natural Stone Test Methods – Petrographic Examination, Institute of Turkish Standards, 17.

TS EN 12504-4 (2012). Testing concrete- part 4: determination of ultrasonic pulse velocity. Ankara: Turkish Standard Institution.

TS EN 934-2 (2011). Admixtures for concrete, mortar and grout-part 2: concrete admixtures-definitions, requirements, conformity marking and labeling. Turkish Standards Institute, TSE, Turkey.

Teymen, A., & Mengüç. E.C. (2020). Comparative evaluation of different statistical tools for the prediction of uniaxial compressive strength of rocks. International Journal of Mining Science and Technology, 30(6), 785-797. https://doi.org/ 10.1016/j.ijmst.2020.06.008.

Tiryaki, B. (2008). Application of artificial neural networks for predicting the cuttability of rocks by drag tools. Tunnelling and Underground Space Tech-nology, 23(3), 273-280. https://doi.org/10.1016/j.tust.2007.04.008

Tugrul, A., & Zarif, I.H. (1999). Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Engineering Geology, 51(4), 303–317. http://doi.org/10.1016/S0013-7952(98)00071-4

Tunc, E.T., & Alyamac, K.E. (2020). Determination of the relationship between the Los Angeles abrasion values of aggregates and concrete strength using the Response Surface Methodology. Construction and Building Materials, 260, 119850. https://doi.org/10.1016/j.conbuildmat.2020.119850

Uysal, M. (2012). The influence of coarse aggregate type on mechanical properties of fly ash additive self-compacting concrete. Construction and Build-ing Materials, 37, 533-540. http://dx.doi.org/10.1016/j.conbuildmat.2012.07.085

Vishalakshi, K.P., Revathi, V., & Reddy, S.S. (2018). Effect of type of coarse aggregate on the strength properties and fracture energy of normal and high strength concrete. Engineering Fracture Mechanics, 194, 52-60. https://doi.org/10.1016/j.engfracmech.2018.02.029

Wang, L., Yong, H., Lu, J., Shu, C., & Wang, H. (2021). Influence of coarse aggregate type on the mechanical strengths and durability of cement concrete. Coatings, 11(9), 1036. https://doi.org/10.3390/coatings11091036

Wu, K.R., Chen, B., Yao, W., & Zhang, D. (2001). Effect of coarse aggregate type on mechanical properties of high-performance concrete. Cement and Concrete Research, 3, 1421-1425. https://doi.org/10.1016/S0008-8846(01)00588-9

Wu, F., Xu, L., Chi, Y., Zeng, Y., Deng, F., & Chen, Q. (2020). Compressive and flexural properties of ultra-high performance fiber-reinforced cementitious composite: The effect of coarse aggregate. Composite Structures, 236, 111810. https://doi.org/10.1016/j.compstruct.2019.111810

Xing, Z., Beacuor, A.L., Hebert, R., Noumowe, A., & Ledesert, B. (2015). Aggregate’s influence on thermophysical concrete properties at elevated temper-ature, Construction and Building Materials, 95, 18-28. https://doi.org/ 10.1016/j.conbuildmat.2015.07.060

Yehia, S., Abdelfatah, A., & Mansour, D. (2020). Effect of aggregate type and specimen configuration on concrete compressive strength. Crystals, 10(7), 625. https://doi.org/10.3390/cryst10070625

Yılmaz, N.G., Goktan, R.M., & Kibici, Y. (2011). Relations between some quantitative petrographic characteristics and mechanical strength properties of granitic building stones. International Journal of Rock Mechanics and Mining Sciences, 48, 506–513. http://doi.org/10.1016/j.ijrmms.2010.09.003

Yılmaz, M., & Tuğrul, A. (2012). The effects of different sandstone aggregates on concrete strength. Construction and Building Materials, 35, 294-303. https://doi.org/ 10.1016/j.conbuildmat.2012.04.014

Zhang, M., & Gjorv, O.E. (1990). Microstructure of the interfacial zone between lightweight aggregate and cement paste. Cement and Concrete Research, 20(4), 610–618. http://doi.org/10.1016/0008-8846(90)90103-5

Zhou, F.P., Lydon, F.D., & Barr, B.I.G. (1995). Effect of coarse aggregate on elastic modulus and compressive strength of high performance concrete. Cement and Concrete Research, 25(1), 177-186. https://doi.org/10.1016/0008-8846(94)00125-I

Zunino, F., Castro, J., & Lopez, M. (2015). Thermo-mechanical assessment of concrete microcracking damage due to early-age temperature rise. Con-struction and Building Materials, 81, 140–153. http://doi.org/ 10.1016/j.conbuildmat.2014.12.126

Downloads

Published

2023-09-01

How to Cite

Teymen, A. (2023). Statistical investigation of the effects of different origin aggre-gate properties on the mechanical properties of concrete. Revista De La Construcción. Journal of Construction, 22(2), 482–508. https://doi.org/10.7764/RDLC.22.2.482