Effect of outrigger system in high-rise buildings on structural behavior and cost

Authors

  • Yenal Takva Department of Architecture, Gazi University, Ankara (Türkiye)
  • Çağatay Takva Department of Architecture, Atatürk University, Erzurum (Türkiye)
  • Zeynep Yeşim İlerisoy Department of Architecture, Gazi University, Ankara (Türkiye)

DOI:

https://doi.org/10.7764/RDLC.22.2.337

Keywords:

High-rise building, outrigger system, structural design, frame, cost.

Abstract

Due to the advantages it provides, the outrigger system is widely used as a load-bearing system element in high-rise buildings around the world. In this study, the design parameters and structure morphology of high-rise buildings were examined, and it was aimed to investigate the performance and cost effects of load-bearing system preferences by designing two types of high-rise buildings in line with the obtained data. The Sta4Cad program, in which the finite element model is applied, was used to perform integrated static, earthquake, and wind analyses of multi-storey reinforced concrete structures. Because of the finite element analysis of the models, when the construction costs were examined, it was found that the outrigger system has a cost rate of 7.2% lower than the frame system. Considering the design trends, the study will create a focal point for researchers and designers and contribute to significant resource savings.

Downloads

Download data is not yet available.

References

Amoussou, C. P. D., Lei, H., Alhaddad, W., & Halabi, Y. (2021). Simplified modeling and analysis method for skyscrapers with outrigger system. Struc-tures, 33, 1033-1050.

Arriagada D, R. E. (2019). Improved building sustainability in seismic zones. Revista de La Construccion, 18(1), 167-177.

Arunachalam, V., Avudaiappan, S., Chandrasekar, N., & Saavedra Flores, E. I. (2020). Earthquake hazard estimation for road tunnel in Northwest Hima-layas. Revista De La Construcción. Journal of Construction, 19(1), 134–145.

Balling, R. J., & Lee, J. S. (2015). Simplified model for analysis and optimization of skyscrapers with outrigger and belt trusses. Journal of Structural Engi-neering, 141(9), 04014231.

Chen, Y., & Zhang, Z. (2018). Analysis of outrigger numbers and locations in outrigger braced structures using a multiobjective genetic algorithm. The Structural Design of Tall and Special Buildings, 27(1), e1408.

Choi, H. S., Ho, G., Joseph, L., & Mathias, N. (2017). Outrigger design for high-rise buildings. Routledge.

Fang, B., Zhao, X., Yuan, J., & Wu, X. (2018). Outrigger system analysis and design under time‐dependent actions for super‐tall steel buildings. The Struc-tural Design of Tall and Special Buildings, 27(12), e1492.

Forcael, E., González, V., Opazo, A., Orozco, F., & Araya, R. (2017). Modeling the performance impacts caused by an earthquake to the construction industry: Case study on the 2010 Chile earthquake. Revista De La Construcción. Journal of Construction, 16(2), 215–228.

Günel, M., & Ilgin, H. (2014). Tall buildings: structural systems and aerodynamic form. Routledge.

Hoenderkamp, J. C. D., & Bakker, M. C. M. (2003). Analysis of high‐rise braced frames with outriggers. The structural design of tall and special buildings, 12(4), 335-350.

Jiang, H., Li, S., & Zhu, Y. (2017). Seismic performance of high-rise buildings with energy-dissipation outriggers. Journal of Constructional Steel Research, 134, 80-91.

Kamath, K., Divya, N., & Rao, A. U. (2012). A study on static and dynamic behavior of outrigger structural system for tall buildings. Bonfring internation-al journal of industrial Engineering and Management Science, 2(4), 15-20.

Kamgar, R., & Rahgozar, R. (2017). Determination of optimum location for flexible outrigger systems in tall buildings with constant cross section consist-ing of framed tube, shear core, belt truss and outrigger system using energy method. International Journal of Steel Structures, 17, 1-8.

Lee, J., Park, D., Lee, K., & Ahn, N. (2013). Geometric nonlinear analysis of tall building structures with outriggers. The Structural Design of Tall and Spe-cial Buildings, 22(5), 454-470.

Lu, X., Lu, X., Sezen, H., & Ye, L. (2014). Development of a simplified model and seismic energy dissipation in a super-tall building. Engineering Struc-tures, 67, 109-122.

Lu, X., Lu, X., Zhang, W., & Ye, L. (2011). Collapse simulation of a super high-rise building subjected to extremely strong earthquakes. Science China Technological Sciences, 54, 2549-2560.

Lu, X., Lv, Z., & Xu, L. (2022). Investigation of a self-centering frictional energy dissipation outrigger equipped to supertall buildings. Journal of Building Engineering, 61, 105313.

Park, K., Kim, D., Yang, D., Joung, D., Ha, I., & Kim, S. (2010). A comparison study of conventional construction methods and outrigger damper system for the compensation of differential column shortening in high-rise buildings. International Journal of Steel Structures, 10, 317-324.

Smith, B. S., & Salim, I. (1981). Parameter study of outrigger-braced tall building structures. Journal of the Structural Division, 107(10), 2001-2014.

Sta4Cad V14.1 (2015). Analysis and design of multi-storey reinforced buildings, STA computer engineering and consulting limited company, İstanbul. Retrieved from: https://www.sta4.net/, Last access date: 30.01.2023.

Takva, Ç., & İlerisoy, Z.Y. (2023a). Structural analysis of steel load-bearing systems using tessellation method in geometric architectural design. Sādhanā 48, 118.

Takva,Ç., & İlerisoy, Z. Y. (2023b). Flying Robot Technology (Drone) Trends: A Review in the Building and Construction Industry. Architecture, Civil Engineering, Environment, 16(1), 47-68.

Takva, Y., Ilerisoy, Z.Y., Gültop, T., & Tuna M.E. (2023a). Optimum cost design of facade scaffoldings. Sādhanā 48, 91.

Takva, Y., Takva, Ç., & Goksen, F. (2023b). A Contemporary House Proposal: Structural Analysis of Wood and Steel Bungalows. Engineering, Technolo-gy & Applied Science Research, 13(3), 11032–11035.

Takva, Y., Takva, Ç., & İlerisoy, Z. Y. (2023c). Sustainable Adaptive Reuse Strategy Evaluation for Cultural Heritage Buildings. International Journal of Built Environment and Sustainability, 10(2), 25–37.

Tan, P., Fang, C. J., Chang, C. M., Spencer, B. F., & Zhou, F. L. (2015). Dynamic characteristics of novel energy dissipation systems with damped outrig-gers. Engineering Structures, 98, 128-140.

Taranath, B. S. (2016). Structural analysis and design of tall buildings: Steel and composite construction. CRC press.

Tavakoli, R., Kamgar, R., & Rahgozar, R. (2019). Seismic performance of outrigger–belt truss system considering soil–structure interaction. International Journal of Advanced Structural Engineering, 11, 45-54.

TS 498 (1997). Design loads for buildings, Turkish Standard, Ankara, 3-19. Retrieved from: https://insapedia.com/wp-content/uploads/2018/07/TS498.pdf, Last access date: 30.01.2023.

TS 500 (2000). Requirements for design and construction of reinforced concrete structures, Turkish Standard, Ankara, 9-67. Retrieved from: https://insapedia.com/wp-content/uploads/2018/07/TS500.pdf, Last access date: 30.01.2023.

TSC (2018). Turkish seismic code-2018, Turkey: Disaster and emergency management, Ankara, 1-395. Retrieved from: https://insapedia.com/wp-content/uploads/2018/07/tbdy-son.pdf, Last access date: 30.01.2023.

Vellaichamy, P. (2022). Effect of outrigger systems for tall buildings. Materials Today: Proceedings, 64, 1129-1136.

Wu, J. R., & Li, Q. S. (2003). Structural performance of multi‐outrigger‐braced tall buildings. The structural design of tall and special buildings, 12(2), 155-176.

Zhou, K., Luo, X. W., & Li, Q. S. (2018). Decision framework for optimal installation of outriggers in tall buildings. Automation in Construction, 93, 200-213.

Zhou, Y., & Li, H. (2014). Analysis of a high‐rise steel structure with viscous damped outriggers. The Structural Design of Tall and Special Buildings, 23(13), 963-979.

Zhou, Y., Xing, L., & Zhou, G. (2021). Spectrum analysis-based model for the optimal outrigger location of high-rise buildings. Journal of Earthquake Engineering, 25(12), 2406-2431.

Zhou, Y., Zhang, C., & Lu, X. (2016). An inter‐story drift‐based parameter analysis of the optimal location of outriggers in tall buildings. The Structural Design of Tall and Special Buildings, 25(5), 215-231.

Downloads

Published

2023-09-01

How to Cite

Takva, Y., Takva, Çağatay, & İlerisoy, Z. Y. . (2023). Effect of outrigger system in high-rise buildings on structural behavior and cost. Revista De La Construcción. Journal of Construction, 22(2), 337–347. https://doi.org/10.7764/RDLC.22.2.337