Strengthening of flexural behavior of reinforced concrete beams by using hybrid fibers: experimental and analytical study
DOI:
https://doi.org/10.7764/RDLC.23.2.354Keywords:
Hybrid fibres, fibre-reinforced concrete beam, steel fibre, glass fibre, load-deflection, ductility.Abstract
The research investigates the flexural behavior of reinforced concrete (RC) beams by incorporating hybrid fibers (a combination of glass and steel fibers). Ten specimens measuring 150 mm x 200 mm x 1500 mm were cast and tested under two-point loading. The specimens were divided into three groups, each containing three specimens. Additionally, a control specimen was examined. Comparing the strength performance of each group to the control specimen revealed that the hybrid fiber-reinforced beams exhibited increased strength. The optimal hybrid fiber composition was 0.4% steel and 0.2% glass fiber. Similarly, the optimal steel and glass fiber percentages were both 0.4%. Experimental results showed that the load-carrying capacity improved significantly: 28.80% with glass fiber, 63.74% with steel fiber, and 79.23% with hybrid fiber compared to conventional RC beams. The study evaluated load-carrying capacity, load deflection, ductility, stiffness, and failure modes of RC beams. An analytical study using finite element modelling was conducted, and the analytical results were compared to experimental findings. Fundamental statistical values included mean, standard deviation, and coefficient of variation for load and deflection. Finite element analysis (FEA) was employed to predict experimental outcomes, and the analytical results closely correlated with experimental data. The load mean, standard deviation and coefficient of variation were 0.98, 0.01, and 0.56, respectively. The deflection exhibited corresponding values of 0.97, 0.01, and 1.41. The graphical abstract of the present study is displayed in Figure 1.
Downloads
References
Abbass, A., Abid, S. & Özakça, M. (2019). Experimental investigation on the effect of steel fibres on the flexural behaviour and ductility of high-strength concrete hollow beams. Advances in Civil Engineering.
Anike, E.E., Saidani, M., Olubanwo, A.O. & Anya, U.C. (2022). Flexural performance of reinforced concrete beams with recycled aggregates and steel fibres. In Structures, 39, 1264-1278.
Anvari, A., Ghalehnovi, M., De Brito, J. & Karimipour, A. (2021). Improved bending behaviour of steel-fibre-reinforced recycled aggregate concrete beams with a concrete jacket. Magazine of Concrete Research, 73(12), 608-626.
Bywalski, C., Kaźmierowski, M., Kamiński, M. & Drzazga, M. (2020). Material Analysis of Steel Fibre Reinforced High-Strength Concrete in Terms of Flexural Behaviour: Experimental and Numerical Investigation. Materials, 13(7), 1631.
Cardoso, D.C., Pereira, G.B., Silva, F.A., Silva Filho, J.J. & Pereira, E.V. (2019). Influence of steel fibres on the flexural behaviour of RC beams with low reinforcing ratios: Analytical and experimental investigation. Composite Structures, 222, 110926.
Chen, G., Gao, D., Zhu, H., Yuan, J.S., Xiao, X. & Wang, W. (2021). Effects of novel multiple hooked-end steel fibres on flexural tensile behaviour of notched concrete beams with various strength grades. In Structures, 33, 3644-3654.
El-Sayed, T.A. (2019). Flexural behaviour of RC beams containing recycled industrial wastes as steel fibres. Construction and Building Materials, 212, 27-38.
Fallah-Valukolaee, S., Hashemi, S.K. & Nematzadeh, M. (2022). Effect of steel fibre on flexural performance of bilayer concrete beams with steel and GFRP rebars: experiments and predictions. In Structures, 39, 405-418.
Fattouh, M.S., Tayeh, B.A., Agwa, I.S. & Elsayed, E.K. (2023). Improvement in the flexural behaviour of road pavement slab concrete containing steel fibre and silica fume. Case Studies in Construction Materials, 18, 01720.
Ghalehnovi, M., Karimipour, A., Anvari, A. & De Brito, J. (2021). Flexural strength enhancement of recycled aggregate concrete beams with steel fibre-reinforced concrete jacket. Engineering Structures, 240, 112325.
Ghalehnovi, M., Karimipour, A., De Brito, J. & Chaboki, H.R. (2020.) Crack width and propagation in recycled coarse aggregate concrete beams rein-forced with steel fibres. Applied Sciences, 10(21), 7587.
Gümüş, M. & Arslan, A. (2019), August. Effect of fibre type and content on the flexural behaviour of high strength concrete beams with low reinforce-ment ratios. In Structures, 20, 1-10
Praveenkumar, S. & Sankarasubramanian, G., (2019). Behaviour of high-performance fibre reinforced concrete composite beams in flexure. Revista Romana de Materiale, 49(2), 259-266.
Raju, R.A., Lim, S., Akiyama, M. & Kageyama, T. (2020). Effects of concrete flow on the distribution and orientation of fibres and flexural behaviour of steel fibre-reinforced self-compacting concrete beams. Construction and Building Materials, 262, 119963.
Sasikumar, P. (2023). A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete. Revista de la construcción, 22(3), 694-706.
Sasikumar, P. (2024). Experimental study on the fully encased composite short columns made with high-strength fibre-reinforced concrete. Asian Journal of Civil Engineering, 25(2), 1-12.
Sasikumar, P., & Manju, R. (2022a). Performance of high strength concrete encased steel composite columns. Revista Romana de Materiale, 52(4), 374-384.
Sasikumar, P., & Manju, R. (2022b). Structural behaviour of high strength concrete columns reinforced with glass fibre reinforced polymer bars under axial loading. Revista Romana de Materiale, 52(4), 412-423.
Sasikumar, P., & Manju, R. (2023). Structural behaviour of axially loaded high strength concrete columns reinforced longitudinally with glass fibre rein-forced polymer bars. Revista de la construcción, 22(2), 293-305.
Sasikumar, P., & Manju, R. (2024) Flexural behaviour of reinforced concrete beams reinforced with Glass Fibre Reinforced Polymer (GFRP) bars: experi-mental and analytical study. Asian Journal of Civil Engineering, 25(2), 1-14.
Sasikumar, P., Nandhakumar, P., & Manju, R. (2022). An experimental work on high strength concrete with addition of sisal fibre. In AIP Conference Proceedings, 2446(1).
Sathish Kumar, V., Ganesan, N., Indira, P.V., Murali, G. & Vatin, N.I. (2022). Flexural Behaviour of Hybrid Fibre-Reinforced Ternary Blend Geopolymer Concrete Beams. Sustainability, 14(10), 5954.
Sumathi, A. & Mohan, K.S.R. (2019). Effect of steel fibre on structural characteristics of high-strength concrete. Iranian Journal of Science and Technolo-gy, Transactions of Civil Engineering, 43, 117-130.
Tahenni, T., Bouziadi, F., Boulekbache, B. & Amziane, S. (2021), Experimental and numerical investigation of the effect of steel fibres on the deflection behaviour of reinforced concrete beams without stirrups. In Structures, 33, 1603-1619.
Tran, T.T., Pham, T.M. & Hao, H. (2019). Experimental and analytical investigation on flexural behaviour of ambient cured geopolymer concrete beams reinforced with steel fibres. Engineering Structures, 200, 109707.
Xu, C., zhou Cao, P., Wu, K., Lin, S.Q. & guo Yang, D. (2019). Experimental investigation of the behaviour composite steel-concrete composite beams containing different amounts of steel fibres and conventional reinforcement. Construction and Building Materials, 202, 23-36.
Zhao, M., Li, C., Su, J., Shang, P. & Zhao, S. (2019). Experimental study and theoretical prediction of flexural behaviours of reinforced SFRELC beams. Construction and Building Materials, 208, 454-463.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 P Sasikumar, K Candassamy
![Creative Commons License](http://i.creativecommons.org/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.